DSE7320 AMF模块，用于单台发电机组。模块具备一系列功能可以满足严苛的现场应用。用于电调或非电调的柴油发动机和天燃气发动机的启动和停机控制。模块还可以监测市电。
控制模块包括USB、RS232和RS485接口以及专用DSENet®扩展设备连接端口。控制器操作简单，界面清晰。改进的功能包含了实时钟，以提高事件和性能监测，以太网的通讯方式可降低监控成本，预保养功能可在发动机发生大的故障之前检测到零件的缺陷。

更多

DSE701是手/自启动控制模块，提供更先进的发动机监控和保护功能。
模块可以用来监控发动机的低油压、高水温、超速和用户可预先设定一个辅助输入端口。通过充电电机上WL端口，可以监测电池充电。当模块检测到故障，发动机自动停机保护。
模块带有一个远程启动信号输入端口。通过预置的远程启动信号输入端口启动模块。

更多

DSE702是手/自启动控制模块，提供更先进的发动机监控和保护功能。
模块可监测低油压、发动机高水温、超速、用户可预先设定一个辅助输入端口。通过充电电机上WL端口，可以监测电池充电。当模块检测到故障，发动机自动停机保护。
模块带有一个防改写的发动机运行小时计和一个远程启动信号输入端口。 通过预置的远程启动信号输入端口，启动模块。

更多

DSE6010 自启动控制模块，用于单台发电机组。模块可用于电调和非电调发动机， 提供更先进的发动机监控和保护功能。
模块带有一个背光液晶显示屏，可清楚的显示发动机在任何时候的运行状态。模块可以监测频率、电压、电流、油压、水温和燃油油位水平。模块还可以显示发动机报警和自动停机保护。
模块包括7个数字输入和6个数字输出。MPU版本配置4路输出，CAN版本配置6路输出。用户可以通过前面板按钮对模块进行数据设定，也可以通过深海其他设定软件来设定。

更多

新产品
DSE6020 AMF模块，用于单台发电机组。模块可用于电调和非电调发动机，提供更先进的发动机监控和保护功能。
模块带有一个背光液晶显示屏，可清楚的显示发动机在任何时候的运行状态。模块可以监测频率、电压、电流、油压、水温和燃油油位水平。模块还可以显示发动机报警和自动停机保护。
模块包括7个数字输入和6个数字输出。MPU版本配置4路输出，CAN版本配置6路输出。用户可以通过前面板按钮对模块进行数据设定，也可以通过深海其他设定软件来设定。
 

更多

自启动模块，用于单台发电机组。模块具备一系列功能可以满足严苛的现场应用。用于电调或非电调的柴油发动机和天燃气发动机的启动和停机控制。
控制模块包括USB、RS232和RS485接口以及专用DSENet®扩展设备连接端口。控制器操作简单，界面清晰。改进的功能包含了实时钟，以提高事件和性能监测，以太网的通讯方式可降低监控成本，预保养功能可在发动机发生大的故障之前检测到零件的缺陷。

更多

The DSE8700 is an easy-to-use, rear-mounted, multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The module is available in 3 variants:
– DSE8710 Auto Start (this can also be programmed as a DSE8720 AMF or a DSE8760 Auto Mains Controller)
– DSE8720 Auto Mains Failure
– DSE8760 ATS/Auto Mains Controller
The modules are designed to work with independent front display screens which are connected via a data link up to a maximum distance of 1km. These must be ordered as a separate item. The DSE8700 monitors the engine and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
Failures are annunciated on the independent front screens (multiple language options available), illuminated LEDs and audible sounder. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as sophisticated communication and system expansion options. Using the DSE PC Configuration Suite Software allows easy alteration of the operational
sequences, timers and alarms. With all communication ports able to be active at the same time, the DSE8700 is ideal for a wide variety of demanding load share applications.

更多

The DSE8660 is an easy-to-use single or multi-mains controller with automatic transfer switch capability.  Designed to synchronise single or multiple DSE8610s with single or multiple mains(utility) supplies, the DSE8660 will automatically control the change over from mains (utility) to generators in synchronisation with the mains (utility) to provide no-break, peak lopping and peak shaving power solutions.

The module can indicate operational status and fault conditions on the LCD screen (multiple languages available), by lit LED, audible sounder and SMS messaging.  Sophisticated communications are also available via RS485 and RS232 for remote PC control and monitoring and intigration into building management systems.  The comprehensive event log will record up to 250 events to facilitate easy maintenance.

An extensive number of fixed and flexible monitoring and protection features are included.  Easy alteration of the timers, sequences and alarms can be made using the DSE PC Configuration Suite Software.  Selected programming is also available via the module's front panel making the DSE8660 ideal for a wide variety of load share applications.

更多

The DSE8610 is an easy to use multi-generator loadshare system, designed to synchronise  up to 32 generators including electronic and non-electronic engines.
The DSE8610 monitors the engine and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
Failures are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.
The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as sophisticated communication and system expansion options.
Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms.
With all communication ports able to be active at the same time, the DSE8610 is ideal for a wide variety of demanding load share applications.

NEW FEATURES INCLUDE SUPPORT FOR NEW EXPANSION MODULES:
DSE2131 – Ratiometric Input Expansion Module
Digital inputs, resistive inputs, 0-10V inputs and 4-20mA inputs. This gives greater flexibility when interfacing the DSE controller to external sensors (ie pressure, temperature, level) 
DSE2133 - RTD/Thermocouple Input Expansion Module
Thermocouple (J and K type) and PT100 RTD (2, 3 and 4 wire types). This allows the connection of accurate temperature sensors such as those embedded into alternator windings.
DSE2152 - Analogue Output Expansion Module
Analogue outputs 0-10V, 4-20mA. This is useful for connection to external devices such as PLCs, building management systems and external gauges.
 

更多