DSE501是手动发动机控制模块，通过面板上的钥匙开关控制发动机。模块用来启动和停止发动机，显示故障状态，自动停机保护，并且通过LED显示灯显示故障状态。

模块可以监测低油压、高水温、超速、充电失败和自动停机。每个报警单元都有一个LED指示灯，指示灯给出故障显示后，模块会自动停止发动机。

更多

DSE701是手/自启动控制模块，提供更先进的发动机监控和保护功能。
模块可以用来监控发动机的低油压、高水温、超速和用户可预先设定一个辅助输入端口。通过充电电机上WL端口，可以监测电池充电。当模块检测到故障，发动机自动停机保护。
模块带有一个远程启动信号输入端口。通过预置的远程启动信号输入端口启动模块。

更多

DSE702是手/自启动控制模块，提供更先进的发动机监控和保护功能。
模块可监测低油压、发动机高水温、超速、用户可预先设定一个辅助输入端口。通过充电电机上WL端口，可以监测电池充电。当模块检测到故障，发动机自动停机保护。
模块带有一个防改写的发动机运行小时计和一个远程启动信号输入端口。 通过预置的远程启动信号输入端口，启动模块。

更多

DSE3110 手动/自启动模块，用于单台发电机组。是国内发电机组OEM常用的、发电机组控制模块之一。
模块可用于电调和非电调机组，提供更先进的发动机监控和保护功能。模块带有一个背光液晶显示屏，可清楚地显示发动机在任何时候的运行状态。模块可以监测发动机的转速、频率和运行小时计。模块可以为发动机报警和自动停机保护。
模块包括6个数字输入和4个数字输出。用户可以通过前面板按钮对模块进行数据设定， 也可以通过深海其他设定软件来设定。模块有CAN（3110-02，适用于电喷发动机）和MPU（3110-01适用于非电喷发动机） 两种不同的版本。

更多

更多

新产品
DSE6020 AMF模块，用于单台发电机组。模块可用于电调和非电调发动机，提供更先进的发动机监控和保护功能。
模块带有一个背光液晶显示屏，可清楚的显示发动机在任何时候的运行状态。模块可以监测频率、电压、电流、油压、水温和燃油油位水平。模块还可以显示发动机报警和自动停机保护。
模块包括7个数字输入和6个数字输出。MPU版本配置4路输出，CAN版本配置6路输出。用户可以通过前面板按钮对模块进行数据设定，也可以通过深海其他设定软件来设定。
 

更多

THIS PRODUCT IS NOW OBSOLETE
 The DSE512 is a Manual Engine Control Module designed to allow the OEM to meet demand for increased capability within the industry.  The module is used to start and stop the engine, indicating the operational status and fault conditions, automatically shutting down the engine and indicating the engine failure by means of a flashing LED.
 Sleceted operational sequences timers and alarms can be altered by the customer.  Alterations to the system are carried out using a PC and the DSE808 Interface.

更多

Manual Start Control ModuleObsoleteDSE511
The DSE511 is a Manual Engine Control Module which has been designed to allow the OEM to  meet demand for increased capability within the industry.  The module is used  to start and stop the engine, indicating the operational status and fault  conditions, automatically shutting down the engine and indicating the engine  failure by means of a flashing LED.  Any simultaneous faults are indicated by a steady LED.
 Selected operational sequences, timers and alarms can be altered by the  customer.  Alterations to the system are carried out using a PC and the DSE808 Interface.

更多

Manual Start Control Module
  (Waterproof)Other ProductsDSE402The DSE402 is a waterproof Manual Engine Control Module.  The module is used to start and stop the engine, indicating any fault conditions, automatically shutting down the engine and indicating. the engine failure by a steady red LED on the front panel.

更多

The DSE8700 is an easy-to-use, rear-mounted, multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The module is available in 3 variants:
– DSE8710 Auto Start (this can also be programmed as a DSE8720 AMF or a DSE8760 Auto Mains Controller)
– DSE8720 Auto Mains Failure
– DSE8760 ATS/Auto Mains Controller
The modules are designed to work with independent front display screens which are connected via a data link up to a maximum distance of 1km. These must be ordered as a separate item. The DSE8700 monitors the engine and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
Failures are annunciated on the independent front screens (multiple language options available), illuminated LEDs and audible sounder. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as sophisticated communication and system expansion options. Using the DSE PC Configuration Suite Software allows easy alteration of the operational
sequences, timers and alarms. With all communication ports able to be active at the same time, the DSE8700 is ideal for a wide variety of demanding load share applications.

更多

DSE703 自启动控制模块，提供更先进的发动机监控和保护功能。
模块用于监控超速、低速、发动机高水温、低油压、充电失败、启动失败等功能。
模块有2个可编程的辅助输入和1个可设定的发动机预热定时器。当模块检测到故障，发动机将自动停机保护，通过LED显示故障信息。
模块自动进行三次启动尝试，三次失败后自动关机。

更多

更多